HS4 for Linux is a modified version of HS4 that runs under Linux. It is full HS4 with the following exceptions:
* No VBScript support (.txt scripts). VB.Net scripting and C# scripting is supported
HS4 for Linux does not require a distinct license. Your HS4 standard, HS4 SEL/Plus, or PRO license will work, though note that you can only use one license per installation.
Linux can be a challenge for non-technical users, the Linux version of HS4 is targeted to the more technical user.
These instructions have been tested under Debian and Ubuntu.
- Install Debian or Ubuntu per its instructions. Ubuntu on Windows 10 will also work.
- Install the following packages that are required by HS4:
Note that MONO is required, but it is already installed with the Debian distribution. However, a few packages are missing:
apt-get install mono-devel
apt-get install mono-vbnc
apt-get install flite
apt-get install chromium
apt-get install aha
apt-get install ffmpeg
apt-get install aplay
- If brltty is installed, this must be removed in order for a Z-Stick to work:
apt-get remove brltty
- Download the latest HS4 tar file, latest release can be found here: https://docs.homeseer.com/display/HSPI/Release+Notes
- Download the latest "Linux Standard" tar file.
- Change the directory to where you want to install it.
Our default is:
- untar with the command:
tar xvf tar_filename
- Change directory into the newly created HomeSeer folder:
- Run HS4 using the "go" script:
HS4 needs to run as root or with sudo (script uses sudo). This is because it listens on a port for the webserver and MONO requires root to do this.
Check the startup log for errors. If all is ok, you can access the web interface on a browser by accessing the IP address if the Linux system with:
By default, HS4 starts listening on port 80. If you happen to have the Apache webserver installed port 80 may be in use. You can edit the HS4 config file in Config/settings.ini and change the setting to a different port, then restart HS4. In the settings file the server port can be changed by adding or modifying the following line:
You can shut down HS4 from the console by hitting enter to get a prompt and then entering: shutdown