Information on performing a Node Test on a Z-Wave network
After restoring a Z-Wave network or an entire HS4 configuration, performing a node test will scan your network to see which devices are communicating and which are not.
Access the Manage Interfaces page from Plugins > Z-Wave > Advanced Functions
- From the Advanced Functions page, select Node Test in the drop-down menu, then click Continue.
- Click Start and the system will reach out to each node in your network and log the results. Once it is complete, it will automatically move along to step 4 where you can click Details to see those logs again. Click Finish to return to your Devices page or Run Another Function if you have more advanced Z-Wave functions to run. If you miss the logs on the Advanced Z-Wave Controller Functions page, you can also go to Tools > Log to review them.
Battery powered devices will need to be woken up in order to respond to a test like this, so do not worry if your battery-powered devices do not respond. Those devices can be tested individually by attempting to control them from the web interface or using the Test Connectivity function in Device Diagnostics.