Search

Help

Page 1 of 11. Showing 101 results (0.02 seconds)

  1. Z-Wave

    Here you will find information regarding the Z-Wave UI v1.0 and further information on using the Legacy Z-Wave plugin, v3. Overview Current Versions Z-Wave UI: 1.0 Z-Wave Core: 3.0.6.1 Frequently Asked Questions How do I import my devices from an existing Z-Wave controller? Need more help? Get
    HomeSeer PluginsJun 08, 2021
  2. Importing Z-Wave Devices

    Importing devices is only necessary if you are using the Aeon Labs Z-Stick to configure your Z-Wave network, otherwise that step can be skipped. You’ll need to import that network into your HomeTroller, so that your devices can be monitored and controlled. Importing Z-Wave Devices From the web interface, use
    HomeSeer PluginsFeb 24, 2021
  3. Adding a Z-Wave Controller

    In order to control Z-Wave devices, such as light switches, thermostats, door locks and sensors, they must be included into a Z-Wave “network”. Follow the steps below to add your Z-Wave controller and create a Z-Wave network. Go to the Plugins drop down menu and select Z-Wave. Select Controller Management
    HomeSeer PluginsFeb 24, 2021
  4. Adding and Removing Z-Wave Devices

    Information on adding and removing a Z-Wave device via the Z-Wave core legacy menu. Adding Z-Wave Devices This includes wall switches, receptacles, plug-in modules, sensors, door locks, etc.  From the web interface, use the pull down menus to navigate to the Z-Wave Controller Management page (Plugins> Z-Wave
    HomeSeer PluginsFeb 24, 2021
  5. HS-MS100+ Z-Wave Installation

    Installing and Z-Wave configuration for the HS-MS100+. Z-Wave Network Installation  Remove the back cover by rotating counter-clockwise and Install 1 CR123A battery (included) inside the unit. Alternately, you may power the unit with a micro USB connection. The HS-MS100+ may be included into your Z-Wave
    HomeSeer ProductsJan 04, 2021
  6. Legacy Z-Wave

    Information on using the Legacy Z-Wave plugin, version 3.0.6.0 or earlier.
    HomeSeer PluginsJun 04, 2021
  7. HS-LS100+ Sensor Z-Wave Installation

    Installing and Z-Wave configuration for the HS-LS100+. Remove the back cover by rotating counter-clockwise and install 1 ER14250 battery (included) inside HS-LS100+. Include the sensor into your Z-Wave network using the instructions below. As this sensor is battery-operated, you will want to make sure
    HomeSeer ProductsJan 04, 2021
  8. HS-FLS100 Z-Wave Inclusion

    Inclusion instructions for the HS-FLS100+. Z-Wave Auto Inclusion  This hardware supports an auto-inclusion feature where it will automatically enter Inclusion mode when first powered up after a factory reset.  Turn off power to the floodlight by turning off the wall switch.  Try to relocate the Z-Wave
    HomeSeer ProductsJan 04, 2021
  9. Restore Z-Wave Network

    This option only works on a select number of Z-Wave Interfaces This option is recommended only if upgrading from another Z-Wave interface. In the web interface, open the PLUG-INS drop menu, then Z-Wave, then select Controller Management.  Expand the listing for your new Z-NET, then select Restore a Network
    HomeSeer ProductsSep 23, 2020
  10. Backup Current Z-Wave Network

    This option only works on the Z-NET and SmartStick+. This article is recommended only if upgrading from another Z-Wave interface. In your HS3 web interface, open PLUG-INS, then Z-Wave, then select Controller Management. Expand the listing for your interface, then select Back Up this interface from the Actions menu
    HomeSeer ProductsSep 23, 2020