Versions Compared


  • This line was added.
  • This line was removed.
  • Formatting was changed.


  1. Download the Silicon Labs CP210x driver for Windows 7 or 8.
  2. Extract the zip file to a folder on your desktop. 
  3. Navigate to the folder you created and run CP210xVCPInstaller_x86.exe if you have 32 bit Windows or CP210xVCPInstaller_x64.exe for 64 bit Windows. Follow the instructions in the installer until it is complete.
  4. Open Windows Device Manager, you can press the Windows key and type Device Manager to locate it.
  5. Expand the Other Devices section, then locate the HubZ Zigbee Com Port. Make a note of which COM port this device is using as we will need it later.
  6. Right click on the device, then select Update Driver
  7. Click Browse my computer for driver software, then Let me pick from a list of available drivers on my computer
  8. Scroll through the computer hardware list and select Ports (COM & LPT), then Next
  9. Find Silicon Labs in the manufacturer list, select it and then Silicon Labs CP210x USB to UART Bridge in the model lest. Then click Next.
  10. You will receive an "Update Driver Warning", click Yes.


Plugin Setup

See here for the next step in Zigbee Plugin and Device Setup