Skip to end of metadata
Go to start of metadata

Here you will find information regarding the Z-Wave UI v1.0 and further information on using the Legacy Z-Wave plugin, v3.


Overview

Current Versions

  • Z-Wave UI: 1.0
  • Z-Wave Core: 3.0.6.1


Frequently Asked Questions

  • How do I import my devices from an existing Z-Wave controller?

Need more help?


Remove Device

Information on removing Z-Wave devices from your network.

Add Interface

Information on adding Z-Wave interfaces to your HomeSeer platform.

Manage Interfaces

Information on managing the Z-Wave interfaces connected to your HomeSeer platform.

Update Device Firmware

Information on how to update your device firmware.

Device Diagnostics

Information on using the different types of Z-Wave device diagnostic tools built into the plugin.

  • RescanInformation on performing a Z-Wave device rescan.
  • Remove Bad NodeInformation on performing Remove Bad Node on a Z-Wave device.
  • Test ConnectivityInformation on performing Test Connectivity on a Z-Wave device.
  • Full OptimizeInformation on performing a Full Optimize on a Z-Wave device.

Advanced Controller Functions

Information on using the many advanced controller functions. 

  • Add UnsecureInformation on adding a device using the unsecure method of Z-Wave.
  • Node TestInformation on performing a Node Test on a device in a Z-Wave network.
  • OpitimizeInformation on performing an Optimize on a Z-Wave network.
  • Optimize FullInformation on performing an Optimize Full on a Z-Wave network.
  • Restart InterfaceInformation on performing a Restart Interface on your Z-Wave interface.
  • Backup InterfaceInformation on performing a Backup Interface on a Z-Wave network on the HomeSeer platform.
  • Restore InterfaceInformation on performing a Restore Interface on a Z-Wave network on the HomeSeer platform.
  • Reset DataInformation on performing a Reset Data on a Z-Wave network.

Legacy Z-Wave

Information on using the Legacy Z-Wave plugin, version 3.0.6.0 or earlier.

  • Adding and Removing Z-Wave DevicesInformation on adding and removing a Z-Wave device via the Z-Wave core legacy menu.
  • Adding a Z-Wave ControllerIn order to control Z-Wave devices, such as light switches, thermostats, door locks and sensors, they must be included into a Z-Wave “network”. Follow the steps below to add your Z-Wave controller and create a Z-Wave network.
  • Displaying Status of Two Sensors with One Icon (HS3)How-to display status of two sensors with one icon in HS3. Note: This will work in HS4 but the steps included graphics are inaccurate.
  • Importing Z-Wave DevicesImporting devices is only necessary if you are using the Aeon Labs Z-Stick to configure your Z-Wave network, otherwise that step can be skipped. You’ll need to import that network into your HomeTroller, so that your devices can be monitored and controlled.

Settings

 include a short blurb consisting of a very high level overview. "IE. Information regarding the template for general articles.". This text will appear on parent pages that have child pages listed

Add Device

Information on adding Z-Wave devices to your network


Additional Information

  • No labels