Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This article shows how to change HomeSeer switch 2-way paddle operation to a simple toggle using HomeSeer events.

HS-WX300

Overview

All HomeSeer switches feature 2-way paddle operation. Tap the top of the paddle and the switch turns on. Tap the bottom of the paddle and the switch turns off. For most use cases, this works fine and is what people expect. However, there may be instances where a simple toggle operation is better, regardless of whether the top or bottom of the paddle is pressed. The switch may be located in an area that's away from view or the operator may be sight impaired. For these situations, simple toggle operation may be preferred. This article shows how to accomplish this using 2 HomeSeer events.


Conventional Operation

By default, all HomeSeer switches work this way

Tap Top Paddle Once

  • Switch Turns On

Tap Bottom Paddle Once

  • Switch Turns Off


Toggle Operation

By default, all HomeSeer switches work this way

Toggle

Tap Top or Bottom Paddle

  • Switch Turns On if Off
  • Switch Turns Off if On




  • No labels